Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- s -

• sample_buffer : adc.c
• save_led : config.c , config.h
• select_next_pattern() : whammy.c , whammy.h
• select_previous_pattern() : whammy.c , whammy.h
• send_control_change() : midi.c , midi.h
• send_control_change_test() : tests.c , tests.h
• send_enable_message() : expression.c
• send_midi_message() : midi.c , midi.h
• send_note_off() : midi.h , midi.c
• send_note_off_test() : tests.c , tests.h
• send_note_on() : midi.c , midi.h
• send_note_on_test() : tests.c , tests.h
• send_program_change() : midi.c , midi.h
• send_program_change_test() : tests.c , tests.h
• send_string() : usb.c
• sequencer : whammy.c
• SEQUENCER_CHANNEL_1 : sequencer.h
• SEQUENCER_CHANNEL_2 : sequencer.h
• SEQUENCER_CHANNEL_3 : sequencer.h
• SEQUENCER_CHANNEL_4 : sequencer.h
• sequencer_channel_mode : sequencer.h
• SEQUENCER_CHANNEL_MODE_CONTINUOUS : sequencer.h
• SEQUENCER_CHANNEL_MODE_ONE_SHOT : sequencer.h
• sequencer_channel_number : sequencer.h
• SEQUENCER_CHANNELS : sequencer.h
• SEQUENCER_PATTERN_01 : sequencer.h
• SEQUENCER_PATTERN_02 : sequencer.h
• SEQUENCER_PATTERN_03 : sequencer.h
• SEQUENCER_PATTERN_04 : sequencer.h
• SEQUENCER_PATTERN_05 : sequencer.h
• SEQUENCER_PATTERN_06 : sequencer.h
• SEQUENCER_PATTERN_07 : sequencer.h
• SEQUENCER_PATTERN_08 : sequencer.h
• SEQUENCER_PATTERN_09 : sequencer.h
• SEQUENCER_PATTERN_10 : sequencer.h
• SEQUENCER_PATTERN_11 : sequencer.h
• SEQUENCER_PATTERN_12 : sequencer.h
• SEQUENCER_PATTERN_13 : sequencer.h
• SEQUENCER_PATTERN_14 : sequencer.h
• SEQUENCER_PATTERN_15 : sequencer.h
• SEQUENCER_PATTERN_16 : sequencer.h
• SEQUENCER_PATTERN_17 : sequencer.h
• SEQUENCER_PATTERN_18 : sequencer.h
• SEQUENCER_PATTERN_19 : sequencer.h
• SEQUENCER_PATTERN_20 : sequencer.h
• sequencer_pattern_number : sequencer.h
• SEQUENCER_PATTERNS : sequencer.h
• SEQUENCER_STEPS_PER_PATTERN : sequencer.h
• sequencer_tick_handler() : whammy.c
• serial_commands : config.c , config.h , config.c , config.h , config.c , config.h , config.c , config.h , config.c , config.h
• serial_commands_size : config.h , config.c , config.h , config.c , config.h , config.c , config.h
• serial_communication_task() : serial_communication.c , serial_communication.h
• set_adc_channel0_max_value() : adc.c , adc.h
• set_adc_channel0_min_value() : adc.c , adc.h
• set_adc_offset() : adc.c , adc.h
• set_frequency() : wave.c , wave.h
• set_gpio_test() : tests.c , tests.h
• set_hmi_led() : hmi.c , hmi.h
• set_led() : leds.c , leds.h
• set_led_test() : tests.h , tests.c
• set_midi_rx_channel() : midi.c , midi.h
• set_midi_tx_channel() : midi.h , midi.c
• set_omni_mode() : midi.c , midi.h
• set_or_update_blinking_led_state() : leds.c
• set_pattern_length() : sequencer.c , sequencer.h
• set_pattern_step() : sequencer.c , sequencer.h
• set_pwm_duty_cycle() : pwm.c , pwm.h
• set_sequencer_pattern() : sequencer.h , sequencer.c
• set_sequencer_speed() : sequencer.h , sequencer.c
• set_speed() : wave.h , wave.c
• set_waveform() : wave.c , wave.h
• show_bar_graph() : hmi.c , hmi.h
• show_led_pattern() : hmi.c , hmi.h
• signal_rx : midi.c
• sine_table : lookup_tables.h
• spi_config : spi.c
• spi_select() : spi.h , spi.c
• spi_transceive() : spi.h , spi.c
• STAIR_WAVE_STEPS : wave.h
• start_sequencer() : sequencer.h , sequencer.c
• status_led : config.h , config.c
• STATUS_LED_PIN : config.h
• stop_sequencer() : sequencer.c , sequencer.h
• STRING_NEXT : whammy.c
• STRING_PREV : whammy.c
• switch_state : expression.c